Radial Piston Pumps - 1R2


Rugged low cost pumps with all parts renewable by replacement. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft. For coupling the pumps to the electric motors standard bell housing assemblies are available. available with two pumping elements. (Please see datasheet for additional details).

Nominal pressure and flow ratings

Pr. bar

550

450

350

300

250

200

No. of  Pumping
Elements

Flow (l / min) @ 1450 rpm

A

B

C

D

E

F

2

1

1.66

2.46

2.86

3.33

3.86


Download PDF  

Radial Piston Pumps - 1R3


Rugged low cost pumps with all parts renewable by replacement. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft. For coupling the pumps to the electric motors standard bell housing assemblies are available. Available with three pumping elements. (Please see datasheet for additional details).


Nominal pressure and flow ratings

Pr. bar

550

450

350

300

250

200

No. of  Pumping
Elements

Flow (l / min) @ 1450 rpm

A

B

C

D

E

F

3

1.5

2.5

3.7

4.3

5

5.8


Download PDF  

Radial Piston Pumps - 1RC / 1RCE


Radial piston arrangement, with 3, 5 or 7 pumping elements. external mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange. (Please see datasheet for additional details).


Nominal pressure and flow ratings

Pr. bar

550

450

350

300

250

200

No. of  Pumping
Elements

Flow (l / min)  @ 1450 rpm

A

B

C

D

E

F

3

1.5

2.5

3.7

4.3

5

5.8

5

2.6

4.2

6.2

7.2

8.4

9.7

7

3.7

5.8

8.6

10

11.7

13.6


Download PDF  

Radial Piston Pumps - 1R / 1RE


Rugged low cost pumps with all parts renewable by replacement. Radial piston arrangement, with 3, 5 or 7 pumping elements. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft. Also available with extension shaft / bracket for through drive. For coupling the pumps to the electric motors standard bell housing assemblies are available. These are also available with extension shaft to couple low pressure pumps. (Please see datasheet for additional details).


Nominal pressure and flow ratings

Pr. bar

550

450

350

300

250

200

No. of  Pumping
Elements

Flow (l / min) @ 1450 rpm

A

B

C

D

E

F

3

1.5

2.5

3.7

4.3

5

5.8

5

2.6

4.2

6.2

7.2

8.4

9.7

7

3.7

5.8

8.6

10

11.7

13.6


Download PDF  

Radial Piston Pumps - 2R


Radial piston arrangement, with 3, 5 or 7 Pumping elements each per pump section. Fixed delivery, Oil immersed type, Open execution, face mounting, Valve controlled. Bi-directional rotation of shaft.
Flows can be combined internally, externally to feed one circuit or used independently to feed Two circuits. (Please see datasheet for additional details).


Nominal pressure and flow ratings

Pr. bar

550

450

350

300

250

200

No. of  Pumping
Elements

Flow (l / min) @ 1450 rpm

A

B

C

D

E

F

3

1.5

2.5

3.7

4.3

5

5.8

5

2.6

4.2

6.2

7.2

8.4

9.7

7

3.7

5.8

8.6

10

11.7

13.6


Download PDF  

Radial Piston Pumps - 2RC / 2RCE


Radial piston arrangement, with 3, 5 or 7 pumping elements. External mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange.
Flows can be combined internally, externally to feed one circuit or used independently to feed Two circuits. (Please see datasheet for additional details).


Nominal pressure and flow ratings

Pr. bar

550

450

350

300

250

200

No. of  Pumping
Elements

Flow (l / min) @ 1450 rpm

A

B

C

D

E

F

3

1.5

2.5

3.7

4.3

5

5.8

5

2.6

4.2

6.2

7.2

8.4

9.7

7

3.7

5.8

8.6

10

11.7

13.6


Download PDF  

Radial Piston Pump - 11R


Radial piston arrangement, with 5 or 7 pumping elements. Oil immersed face mounting. Valve controlled. Fixed delivery. Bi-directional rotation of shaft. With extension shaft for through drive. Available with extension bracket assembly for coupling a low pressure pump having standard flange. (Please see datasheet for additional details).


Nominal pressure and flow ratings

Pr. bar

400

315

250

No. of Pumping
Elements

Flow (l / min) @ 1450 rpm

A

B

C

5

10.6

13.8

17.5

7

14.8

19.5

24.5


Download PDF  

Radial Piston Pump - 11RC


Radial piston arrangement, with 5 or 7 pumping elements. External mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange. (Please see datasheet for additional details).


Nominal pressure and flow ratings

Pr. bar

400

315

250

No. of Pumping
Elements

Flow (l / min) @ 1450 rpm

A

B

C

5

10.6

13.8

17.5

7

14.8

19.5

24.5


Download PDF  

Radial Piston Pump - 12R


Radial piston arrangement, with 5 or 7 pumping elements each per pump section. Oil immersed face mounting. Valve controlled. Fixed delivery. Bi-directional rotation of shaft. With extension shaft for through drive. Available with extension bracket assembly for coupling a low pressure pump having standard flange. (Please see datasheet for additional details).

Nominal pressure and flow ratings

Pr. bar

400

315

250

No. of Pumping
Elements

Flow (l / min) @ 1450 rpm

A

B

C

5

10.6

13.8

17.5

7

14.8

19.5

24.5

Download PDF  

Radial Piston Pump - 12RC


Radial piston arrangement, with 5 or 7 pumping elements each per pump section. External mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange. (Please see datasheet for additional details).

Nominal pressure and flow ratings

Pr. bar

400

315

250

No. of Pumping
Elements

Flow (l / min) @ 1450 rpm

A

B

C

5

10.6

13.8

17.5

7

14.8

19.5

24.5

Download PDF  

Bell Housing Assembly - BH (ISO)


The bell housing series BH are designed for coupling hydraulic pumps having ISO flanges to electric motors having metric flanges.
The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled.

Mounting Position Axis of the assembly can be mounted in any direction
Pump mounting flange As per ISO 3019/1-1975(E)
Motor mounting flange As per IS 2223/IEC 72-2
Flexible coupling Spider type.

Download PDF  

Bell Housing Assembly (Factory Standard) - BHP


The bell housing series BHP are designed for coupling hydraulic pumps having flanges to electric motors having metric flanges. These bell housings are precisely machined to reduce misalignment of coupled shafts. The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled. The construction also reduces the noise generation considerably.

Download PDF  

Extension Bracket Assembly - EB


The bell housing series EB are designed for coupling hydraulic pumps having ISO flanges to electric motors having metric flanges. These bell housing are precisely machined to reduce misalignment of coupled shafts. The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled. The construction also reduces the noise generation considerably.

Download PDF  

Hand Pumps - HP12 & HP16


Heavy duty construction. Renewable internal parts by replacement. Integral Relief and Release valves. Collapsible hand movement at low pressure. (Please see datasheet for additional details).

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Flow capacity
c.c./stroke

Oil tank
capacity (ltrs.)

HP12
HP16
HP12-1000

700
350
1000

2.8
5
2.8

1.2

Download PDF  

Hand Pumps with Rotary Directional Control Valves - HP*-D


Hand pump model HP*-D are compact heavy duty pumps designed for industrial applications like operating small presses, fixtures as well as providing source of oil for hydraulically operated emergency equipments. These hand pumps are equipped with integral Rotary Directional Control Valve with two outlet ports for switching of the flow between the two sides of a double acting cylinder. The Rotary valve has pressure holding ability.

Download PDF  

Hand Pumps (Tank Side Mounting) - HPTS12, HPTS16 & HPTS12-1000


Hand pumps series HPTS** are identical in specifications to series HP** pumps, except that, these pumps are meant for mounting on the side wall of oil reservoir / tank of a hydraulic system and therefore can be integrated into the main system as a stand-by pump or can be used as a power source for cylinders or jacks which need large volume of oil for their actuation by mounting them on side wall of suitably designed oil tank.

Download PDF  






Direct Operated Pressure reducing Valve - DPM


Direct acting construction with built-in pressure relief for secondary port.By-pass Check Valve optional.

Nominal flow and pressure ratings

 Max. flow handling capacity

20 l/min.

 Max. setting pressure

200 bar

 Max. working pressure

315 bar

Download PDF  

Direct Operated Pressure sequence Valve - DPS 06


Direct acting spool type pressure sequence valve. Models available :
Internal pilot, internal drain.
External pilot, internal drain.
Internal pilot, external drain.
External pilot, external drain.
Port A normally connected to port T : control at port P port A normally connected to port T : control at port B Four pressure ratings 25, 50, 100, or 200 bar.For reverse free flow, optional check valve can be supplied as a stackable module. Pressure adjustment by screw or hand knob.

Nominal flow and pressure ratings

 Max. flow handling capacity

25 l/min.

 Max. setting pressure

200 bar

 Max. working pressure

315 bar

Download PDF  

Pilot Operated Pressure Relief Valves (Cartridge Type) - PPR 06K


Two stage Spool type Relief / Reducing Valve Cartridge Low pressure override due to larger flow area.
Two options for pressure adjustment,
- With set screw and lock nut.
- With hand knob and lock nut.
Internal drain valves can be converted to external drain.

Nominal flow and pressure ratings
 Max. flow handling capacity

30 l/min.

 Max. setting pressure

315 bar

 Max. working pressure

315 bar

Download PDF  

Pilot Operated Pressure Reducing Valves (Cartridge Type) - PPM 06K


Two stage Spool type Relief / Reducing Valve Cartridge Low pressure override due to larger flow area.
Two options for pressure adjustment,
- With set screw and lock nut.
- With hand knob and lock nut.

Nominal flow and pressure ratings
 Max. flow handling capacity

30 l/min.

 Max. setting pressure

200 bar

 Max. working pressure

315 bar

Download PDF  

Pilot Operated Pressure Relief Valve (Modular Construction) - MPPR 06


Pilot operated pressure relief valve modular construction for vertical stacking assemblies.
For Cartridge Valve details refer p09605
Interface conforming to ISO 4401 - AB - 03 -04 - A, IS 10187, DIN 24340 Four models available.

Nominal flow and pressure ratings

 Max. flow handling capacity

30 l/min.

 Max. setting pressure

315 bar

 Max. working pressure

315 bar

Download PDF  

Pilot Operated Pressure REDUCING Valve (Modular Construction) - MPPM 06


Pilot operated pressure reducing valve modular construction for vertical stacking assemblies.
For Cartridge Valve details refer p09605
Interface conforming to ISO 4401 - AB - 03 -04 - A, IS 10187, DIN 24340 Four models available.

Nominal flow and pressure ratings

 Max. flow handling capacity

30 l/min.

 Max. setting pressure

315 bar

 Max. working pressure

315 bar

Download PDF  

Pilot Operated Pressure Relief Valves - PPR


Pilot operated seat type valve. High flow handling capacity, low pressure override, remote controllability and solenoid unloading possibility are the main features of these valves. Bodies available with threaded ports or sub-plate mounting style.

Nominal flow and pressure ratings
Model Max. working
pr. (bar)
Max. flow
(l/min)
PPR 10 315 100
PPR 20 315 200
PPR 30 315 400

Download PDF  

Pilot Operated Pressure Relief cum Unloading Valve - PPRU


Two stage poppet type Relief cum unloading valve. Additional solenoid unloading facility as an optional feature. Three standard sizes - 10, 20, & 30.

 Operating Pressure  For port 'A', 'X' and 'P' --- 315 bar
 For port 'B' ----- 60 bar
 Max. flow handling capacity  For Valve Size
 10 -------- 100 l/min.
 20 -------- 200 l/min.
 30 -------- 400 l/min.

Download PDF  

Pilot Operated Pressure reducing Valve - PPM


Two stage pilot operated construction. These valves are normally open type valves. When the pressure in the secondary port ( port B ) increases to set pressure, the valve closes against the spring.

Size Max. Working
Pr.(Inlet)
Reduced
Pr.
Max. flow
(l/min)
PPM10 315 adjustable upto
5 to 315
80
PPM20 200
PPM30 300

Download PDF  

Pressure Control Modules - PCM 06-06


Designed to control double pumps of a Hi-Low system. Unloads low pressure pump when system pressure rises above the pressure set on unloader valve. Relieves high pressure pump when system pressure reaches the value.

Nominal flow and pressure ratings

Model

Max. pr. for
High pr. relief
(bar)

High pr.
Flow (l/min)

Max. pr. For
unloading
(bar)

Low pr.
Flow
(l/min)

PCM 06-06

400

25

50

25

Download PDF  

Pressure Control Modules - PCM 20


Designed to control Double pumps of a Hi-Low system. Consists of a High pressure relief valve, a Check valve and a low pressure unloading valve. Unloading of pumps by Solenoid valve / Valves as an optional feature.

Nominal flow and pressure ratings

Model

Max. pr. for
High pr. relief
(bar)

High pr.
Flow (l/min)

Max. pr. For
unloading
(bar)

Low pr.
Flow
(l/min)

PCM20-06

315

25

100

160

PCM20-10

315

60

100

160

Download PDF  

Pressure Control Modules - PCM 20-16


Designed to control Double pumps of a Hi-Low system. Consists of a High pressure relief valve, a Check valve and a low pressure unloading valve. Unloading of pumps by Solenoid valve / Valves as an optional feature.

Nominal flow and pressure ratings

Model

Max. pr. for
High pr. relief
(bar)

High pr.
Flow (l/min)

Max. pr. For
unloading
(bar)

Low pr.
Flow
(l/min)

PCM20-16

315

100

100

160

Download PDF  

Counter Balance Valve - CB


Counter balance valves are seat type valves. They offer free-flow from their port B to A and give leak free closure in opposite direction upto a predetermined pressure. This predetermined cracking pressure can be adjusted within its maximum specified range.

  CBS10T  CBS20T
Flow handling capacity 30 lpm 115 lpm
     

Download PDF  

Counter Balance Valve - CB Design series 30


Counter balance valves are seat type valves. They offer free-flow from their port B to A and give leak free closure in opposite direction upto a predetermined pressure. This predetermined cracking pressure can be adjusted within its maximum specified range.

 Flow handling capacity  200 lpm
 Max. Set Pressure  50 bar
 Operating pressure  315 bar

Download PDF  

Direct Operated Pressure control Valve - DPC


Hydraulically cushioned valves, used to control sequencing, relieving, unloading or counter-balancing operations.

Nominal flow and pressure ratings

 Max. flow handling capacity

160 l/min

 Max. setting pressure

160 bar 

 Max. working pressure

350 bar

Download PDF  

Rotary Directional Control Valve - 4RDL02


A lever operated rotary type directional control valve is generally used for high pressure applications at low flow. These valves are used where leak-free closure is required.


Lever Operated Directional Control Valve (Old Series) - DL10 ( Series 10 )


Completely encapsulated control mechanism for protection against dirt. Five chamber design. Flexibility in rotating the operating mechanism by 90° x 4. Wide variety of spools available in subplate model only.

Nominal flow and pressure ratings

Model

Max. working pr. (bar)

Max. flow l/min.

4DL 10

 Port P, A and B ..... 350
 Port T ................ 100

100



Pilot Operated Directional Control Valve (New Series) - DP 10


Pilot operated directional control valves are hydraulically operated spool valves. They control the start, stop & direction of fluid flow. Available in 19 spool configurations. Available as spring centered and spring offset. Mounts on standard ISO 4401, IS10187.

Nominal flow and pressure ratings

Model

Max. working pr. (bar)

Max. flow l/min.

4DP 10

 Port P, A and B ...... 350
 Port T ................... 250
 Port X and Y .......... 150

120


Lever Operated Pressure Holding D.C.V. - DLS 10, DLS 20


Designed for single acting cylinders which are supposed to hold pressure. Ensures smooth decompression prior to return of the cylinder ram. Large return oil passage to reduce pressure drops, allowing rams to return under low external forces. Valves can be connected in series for independent multiple single acting cylinder operations.


Solenoid Pilot Operated Pressure Holding D.C.V. - DES 10, DES 20


Designed for single acting cylinders which are supposed to hold pressure.
Specially suitable for rubber moulding presses. Ensure smooth decompression prior to return of the cylinder ram. Available as standard & Quick Exhaust. Large return oil passages allows rams to return under low external forces. Valves with quick exhaust feature have 2.34 times larger return passages. Provided with manual opening in case of power failures.
Valves can be connected in series for independent multiple single acting cylinder operations. The valve is actuated by a solenoid controlled pilot.

Flow passage areas

Valve

Model

P to A
P to B

B to T

Standard

4DES20A

3.1 cm²

5.3 cm²

With quick
exhaust feature

4DES20A

3.1 cm²

12.4 cm²

Operating Pressure

For ports P, A, B, C, G --- 350 bar
For port T ------------- 7 bar max.

Pilot Pressure 35 bar.


Solenoid Operated Directional Control Valve (CETOP 03) - DE 06 (315 bar, 63 lpm)


Direct solenoid operated, spool type, mounting on ISO 4401-03-02.
Five chamber body and spool design provides low-pressure drop, with maximum performance. Balanced spool design ensures proper shifting force for maximum reliability and long life. All spools and bodies are interchangable, simplifying maintenance. Wet pin DC solenoids ensure better heat dissipation, quitter operation, there by increasing solenoid life. Moulded solenoid coils eliminate moisture problems and ingress of dust. Plug-in-coils for ease of maintenance. Indicator lights are a standard option.


Solenoid Operated Directional Control Valve (CETOP 05) - DE 10 (315 bar, 120 lpm)


4-port, spool type, solenoid operated, directional control valves with wet armature AC or DC coils and wide variety of spool types with spring centered and spring-offset arrangements.

  • Five chamber body and spool design to facilitate high flow.
  • Conforms to ISO4401-5, NFPA T3.5.1M R1 and ANSI B93-7 D 05 interface.
  • Available in 52 standard, interchangeable spool configurations.
  • Removable wet-armature AC and DC solenoids for quick replacement and conversions. Moulded solenoid coils to protect against moisture and ingress of dust.
  • Individual solenoid plug-in connectors with indicator lights to ISO 4400 and DIN 43650.
  • Special R-rings for high extrusion resistance. Increased stability under high dynamic condition.
  • Override for operation of valve without electrical power.

Note on solenoid identification : Solenoid "a" is close to Port "A" and Solenoid "b" is close to Port "B" for a direct operated valve.


Lever Operated Directional Control Valve (CETOP 03) - DL 06


Completely encapsulated mechanism for protection against dirt. Five chamber design for better reduction in dynamic forces and longer valve life. Available as spring centered, spring off-set or detented model. Operating head can be rotated by 90° x 4 around spool axis for flexibility in mounting. Valve mounting interface conforms to ISO 4401-03-02. Five chamber body and spool design provides low-pressure drop, with maximum performance. Balanced spool design ensures proper shifting force for maximum reliability and long life. All spools and bodies are interchangable, simplifying maintenance.



Pilot Operated Directional Control Valve - DP 20


Pilot operated directional control valves are hydraulically operated spool valves. They control the start, stop & direction of fluid flow. Available in 19 spool configurations. Available as spring centered and spring offset. Mounts on standard ISO 4401, IS10187.

Nominal flow and pressure ratings

Model

Max. working pr. (bar)

Max. flow l/min.

4DP 20

 Port P, A,  and B ....... 350
 Port T ...................... 250
 Port X and Y ............. 150

300


Solenoid Pilot Operated Directional Control Valve - DEP 20


Available as spring centered, spring offset Valve mounting interface conforms to International and National standards. Minimum pilot pressure is 5 bar.

Nominal flow and pressure ratings

Model

Max. working pr. (bar)

Max. flow l/min.

4DEP20

 Port P, A, B and X ............... 350
 Port T (with internal drain) ... 160
 Port T (with external drain) .. 250
 Port Y ............................... 160

300


Lever Operated Directional Control Valve - DL20


Completely encapsulated control mechanism for protection against dirt. Five chamber design. Wide variety of spools available both in subplate and threaded model.

Nominal flow and pressure ratings

Model

Max. working pr. (bar)

Max. flow l/min.

4DL20

 Port P, A and B ..... 350
 Port T (with internal drain) .. 100
 Port T (with external drain) .. 250

300


Solenoid Operated Cartridge Directional Control Valve - CDE 06


  • Solenoid operated cartridge type directional control valve.
  • Sliding spool construction.
  • Wet pin solenoids ensure better heat dissipation, quieter peration, there by increasing solenoid life.
  • Moulded solenoid coils eliminate moisture problems and ingress of dust.
  • Plug-in-coils for ease of maintenance.
  • Indicator lights are a standard feature.


Solenoid Operated Directional Control Valve (CETOP 05) - DE10-LP (210 bar, 100 lpm)


4-port, spool type, solenoid operated, directional control valves with wet armature AC or DC coils and wide variety of spool types with spring centered and spring-offset arrangements.

  • Five chamber body and spool design to facilitate high flow.
  • Conforms to ISO4401-5, NFPA T3.5.1M R1 and ANSI B93-7 D 05 interface.
  • Available in 52 standard, interchangeable spool configurations.
  • Removable wet-armature AC and DC solenoids for quick replacement and conversions.
  • Moulded solenoid coils to protect against moisture and ingress of dust.
  • Individual solenoid plug-in connectors with indicator lights to ISO 4400 and DIN 43650.
  • Special R-rings for high extrusion resistance. Increased stability under high dynamic condition.
  • Override for operation of valve without electrical power.

Note on solenoid identification : Solenoid "a" is close to Port "A" and Solenoid "b" is close to Port "B" for a direct operated valve.


Pressure compensated flow control valve - PF


Pressure compensated. Check valve option for reverse-free flow. Four rotations of hand knob to facilitate the setting with ease. Thumb screw provision to retain valve setting. Stroke limiter available as an option.

Max. working pr. 315 bar
Flow controlling
capacity
Minimum 
0.25 to 4 l/min, 0.5 to 8 l/min, 1 to 16 l/min, 2 to 32 l/min or 3 to 40 l/min.

Download PDF  

Flow divider valve - FD


Flow divider valves provide dual flow from a single source at a predetermined ratio, regardless of load. Maximum dividing error is 5%, Threaded port body.

Inlet Flow

5 -10

10 -18

15 -30

30 -100

Max. Pr. (bar)

315

Dividing Ratio (%)

50 : 50

Download PDF  

Throttle / Check Valve (Modular) - TCM 06


Double throttle cum check, non pressure compensated, modular construction. Can be used as Metering-in or Metering-out device.

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Max. flow
l/min.

TCM 06

315

40

Download PDF  

Throttle / Check Valve (Modular) - TCM 10


Double throttle cum check, non pressure compensated, modular construction. Can be used as Metering-in or Metering-out device.

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Max. flow
l/min.

TCM 10

315

100

Download PDF  


Check Valve - C


These seat type valves allow free flow from port A to port B and give leak-proof closure in opposite direction. Available as inline mounting or Sub-plate mounting as per factory & ISO standards.

Nominal flow and pressure ratings

Model

C06

*C08

C10

*C15

C20

*C25

C30

Max. working
pr. (bar)

315

315

315

315

315

315

315

Max. flow
l/min.

10

20

30

80

120

220

280

* : Available only in threaded type.

Download PDF  

Check Valve - C (ISO)


Seat type valves. Allow free flow from port A to port Band offer leakage free closure in opposite direction. Available in four sizes of standard interfaces conforming to
ISO 5781
IS 10187
DIN 24340
Each model available with options of four cracking pressures : 0.5, 1.5, 3 and 5 bar.

Download PDF  

Check Valve - CI


Seat type valves, Model CI with internal drain. Threaded or Sub-plate mounting construction. Available with two pilot piston size options only for Model CI.

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Max. flow
l/min.

CI10

315

80

CI20

315

160

CI30

315

350

Download PDF  

Check Valve - CI06


Seat type valves, Model CI with internal drain. Threaded or Sub-plate mounting construction. Available with two pilot piston size.

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Max. flow
l/min.

CI06

700

30

Download PDF  

Check Valve - CL


Seat type valves, CL with external drain. Threaded or Sub-plate mounting construction.

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Max. flow
l/min.

CL10

315

80

CL20

315

160

CL30

315

350

Download PDF  

Check Valve - 2CI


These valves are available with the pilot operated check valve facility on either A or B or both A and B threaded ports.
The hydraulic opening operation for free flow in reverse direction is achieved by means of internal pilot pressure available from the other working port.

Download PDF  

By-pass Check Valve (Modular) - BCM


Seat type modular valve. Intended for by - passing. Pressure control valve,Pressure reducing valve etc. to achieve reverse free flow condition.Allow free flow from port A to port B or from port B to port A ( see model code ) and offer leakage free closure in opposite direction. Available in four sizes of standard interfaces conforming to ISO 5781, DIN 24340 or IS 10187 Each model available with options of four cracking pressures : 0.5, 1.5, 3 and 5 bar.

Size Max. operating
pressure
Flow handling
capacity l/min
06
10
315 bar 20
50

Download PDF  

Pilot operated check valve (Modular) - CIM 06


These modular valves are available with the pilot operated check valve facility on either 'A' or 'B' ports. The hydraulic opening operation for free flow in reverse direction is achieved by means of internal pilot pressure available from the other working port. Interface conforming to
ISO 4401-AB-03-04-A
IS 10187
DIN 24340
To ensure proper closure of both valve poppets, both user connections should be unloaded when the control valve is in the neutral by connecting with the return line.

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Max. flow
in l/min.

CIM 06

315

35

Download PDF  

Pilot operated check valve (Modular) - CIM 10


These modular valves are available with the pilot operated check valve facility on either A or B or both A and B ports. The hydraulic opening operation for free flow in reverse direction is achieved by means of internal pilot pressure available from the other working port.
To ensure proper closure of both valve poppets, both user connections should be unloaded when the control valve is in the neutral position by connecting with the return line.

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Max. flow
in l/min.

CIM 10

315

80

Download PDF  

Shuttle Valves - SL


Seat type construction. Automatically connects it's P port to either A or B depending upon whichever of the two ports is at higher pressure level. Isolates port A and B from each other. Port P gets connected to tank, only if, port A and port B are connected to tank. Available both in Threaded and Sub-plate type.

Nominal flow and pressure ratings

Model

Max. working pr. (bar)

Nominal flow
handling capacity

SL

315

30 l/min. at 7.5
bar pr. drop

Download PDF  

Prefill valve ( PV 32 - 80 )


Intended for prefilling and exhausting of large hydraulic cylinders. Can be used as anticavitation check valves. Decompression feature is optional up to size 80.

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Max. flow l/min.

Prefilling

Exhausting

PV 32
(New)

315

96

216

PV 40

315

152

304

PV 50

315

236

472

PV 63

315

372

744

PV 80

315

608

1216

Download PDF  

Prefill valve ( PV 100 - 200 ) - 21 Series


The Prefill Exhaust Valve (PV) is a hydraulic-pilot operated check valve with seat type construction. It allows free flow from port A to port B. Flow from port B to port A can be enabled by applying pilot pressure to it's port X.
The decompression feature enables the valve to open in two stages progressively, allowing smooth and rapid exhaust of the compressed oil. Opening and closing time of the valve can be influenced by providing Throttle-Check Valves in the X port line.
Flanged port A of the valve housing can be rotated around vertical axis through 360° to facilitate access to flange fixing bolts and flange orientation

Features

  • Integrated Seat provides high rigidity, high fatigue resistance and less deflection of the flange.
  • Encapsulated O-ring allows easy of assembly and prevents o-ring damage during assembly.
  • Simplified Cavity machining
  • Larger suction flange to reduce pressure drop in the suction line and consequently increase flow handling capability
  • Improved Pilot cylinder sealing to minimize pilot leakage and reduce frictional loss during operation.

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Max. flow l/min.

Prefilling

Exhausting

PV 100

315

940

1880

PV 125

315

1480

2960

PV 150

315

2120

4240

PV 200

315

3800

7600

Download PDF  

Check Valve, SCREW-IN CARTRIDGE - KSC / KSD


Two port screw-in cartridge valves that are designed to fit in a cavity confirming to ISO 7789 : 1998 (E). These are seat type vales, available in four different sizes and with five different cracking pressure in each size.
Check valves allow free flow in one direction while providing leak-free closure in reverse direction.

Features

  • Fits into ISO 7789 : 1998 (E) cavity. (other cavities available on request)
  • Cartridge construction for compact integrated manifolds
  • Economical
  • Quick and Easy field service, reduces down time
  • Valve Bodies available on request

Cartridge Valves - CV 16 to CV 40


These valves are suitable for mounting in manifold cavities machined as per ISO 7368. By selecting suitable cartridge and cover, it is possible to achieve functions like Check valve, Directional control valve, Unloading valve, Throttle valve etc. These valves offer fast response, have very low internal leakage and can handle very large flow rates. The cartridges are available with two area ratios.

Nominal flow and pressure ratings

Model

CV 16

CV 25

CV 32

CV 40

Max. working
pr. (bar)

350

350

350

350

Max. flow
l/min.

160

400

600

1000

Download PDF  

Two Port Slip-In Cartridges ISO 7368 - CV 50 to 100


Slip in cartridge valves are two port valves that can be inserted into compact manifold control blocks, having cavities that are machined as per ISO 7368. The function of the cartridge valve depends on the type of control cover used. With the help of suitable control cover the cartridge valve can assume pressure, directional, throttling or combination of these function.
Cartridge valves are available in two area ratios and four cracking pressures. Depending upon the function required, cartridge valve having Suitable area ratio must be used.
The control covers will have to be ordered separately.

Nominal flow and pressure ratings

Model

CV 50

CV 63

CV 80

CV 100

Max. working
pr. (bar)

350

350

350

350

Max. flow
l/min.

1900

2700

4600

7400

Download PDF  

Joystick Controlled - 4JP 06


4JP 06 Joystick Controlled Pilot Oil Unit is a Manual Joystick control valve, meant for providing variable pilot pressure to the hydraulic components like Proportional Pilot Operated Directional Control Valves, Pumps and motors etc., which need variable pilot pressure to control their outputs. The valve has two pairs of outlets, which can be operated independently or in tandem. Depending upon the Joystick tilt, the valve provides variable pressure to one or two of its outlets at a time. The pilot pressure can be regulated in the pressure range of 6 to 19 bar.

Currently we are supplying this valve to - All Customers

Download PDF  

Joystick Controlled - JP 10


Pilot oil unit series 4JP are intended for giving sensitive pressure signals to pumps, Valves or Hydraulic motors which need to be controlled by remote pilot pressure. Functioning of these valves is based on spool type direct acting pressure reducing valve principle.

Nominal flow and pressure ratings

Model

Max. working
pr. (bar)

Pr. Range
in bar

Deflection
Range

Pilot oil
flow

Hysterises

JP

 Input pr. --> 50

6 to 15

4° to 25°

16 l/min.

1 bar

 Pr. at port T --> 3

6 to 26

Download PDF  


Lock Valve (Developed for OEM Customers)


Lock valve, basically two position directional control valve designed to have flexibility in diverting the flow. The valve is provided with single pump connection, three common ports designated as 'A' and four common tank ports designated as 'T'. In normal position, pump flow is connected to A ports and at an angle in between 78° - 100° port A is connected to tank with throttling effect. Currently we are supplying this valve to
Telcon for Tata - Hitachi Excavators.






FOOT PUMP - FP


Heavy duty construction with hardened and ground plunger. Both suction and delivery valve seats are replaceable. Intended for supply of lubricating oil or pilot pressure.

Download PDF  



Pressure Switch - 1PS


Non adjustable differential type. Spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available, which can be adjustable upto 10, 50, 100, 200, 350 and 420 bar. Transparent plug-in connector is available with LED

Model

Max. Operating
pr. (bar)

Pr. Range

1PS

420

Adjustable upto
10, 50, 100, 200, 350 and 420 bar.

Download PDF  

Return Line Filter - RF


Threaded type and Sub-plate mounting style. Paper element as filtration media. Spin-on disposable canisters. Integral by-pass check valve.

Nominal flow and pressure ratings
Model Max. working
pressure
Flow handling
capacity
Filtration
capacity
RF 7 bar 40 l/min. 25 microns 

Download PDF  

Foot Valve


These valves are recommended , when the pumps are installed with negative suction head. Threads for the Foot valve are sized to provide approximately 3 times larger capacity of the strainer. Strainer is not included in the scope of supply.

Download PDF